CAM CHAIN TENSION ADJUSTER
• Apply engine oil to the push rod.
• Turn the adjusting screw clockwise with a - screwdriver until
the rod locked.
• Install the cam sprocket 3 .
• Apply a small quantity of THREAD LOCK SUPER "1322" to
the cam sprocket bolt 4 .
99000-3208: THREAD LOCK SUPER "1322"
• Tighten the cam sprocket bolt to the specified torque.
Cam sprocket bolt: 11 N·m (1.1 kgf-m, 8 lb-ft)
• Install the gasket 1 and cam chain tension adjuster 2 to the
cylinder.
The removed gasket must be replaced with a new one
to prevent oil leakage.
• Tighten the cam chain tension adjuster mounting bolts to the
specified torque.
Cam chain tension adjuster mounting bolt:
• Turn the adjusting screw counter clockwise with a - screw-
driver until the push rod unlocked.
• Install the cam chain tension adjuster plug cap 3 .
10 N·m (1.0 kgf-m, 7.0 lb-ft)
ENGINE
3-75