Break-In Procedures - Suzuki LT-Z90 Manual

1-6 GENERAL INFORMATION

BREAK-IN PROCEDURES

During manufacture only the best possible materials are used and all machined parts are finished to a very
high standard but it is still necessary to allow the moving parts to "BREAK-IN" before subjecting the engine
to maximum stresses. The future performance and reliability of the engine depends on the care and restraint
exercised during its early life. Refer to the following throttle position recommendations.
• Keep to these break-in throttle position:
Brake-in engine speeds
Up to 10 hours: Less than 1/2 throttle