Engine Disassembly - Suzuki LT-Z90 Manual

ENGINE DISASSEMBLY

STARTER MOTOR
• Remove the starter motor.
SPARK PLUG
• Remove the spark plug.
09930-10121: Spark plug wrench set
CYLINDER HEAD COVER
• Remove the cylinder head cover bolts, and then remove the
cylinder head cover 1 .
CYLINDER HEAD
• Remove the valve timing inspection plug 1 and generator
cover cap 2 .
• Turn the crankshaft with a box wrench to set the piston at
TDC on the compression stroke. (Rotate the generator rotor
until the line A on the generator rotor is center of the hole in
the generator cover.)
ENGINE 3-9