Suzuki LT-Z90 Manual page 125

• Apply engine oil to both sides of the washers 1 .
• Install the cylinder head cover 2 .
• Lightly tighten the cylinder head cover bolts and then tighten
them to the specified torque.
Cylinder head cover bolt
The removed washers must be replaced with new
ones to prevent oil leakage.
• Install the spark plug. (
STARTER MOTOR
• Apply SUZUKI SUPER GREASE "A" to the O-ring.
• Install the starter motor 1 .
99000-25010: SUZUKI SUPER GREASE "A"
The removed O-ring must be replaced with new ones
to prevent oil leakage.
INTAKE PIPE
• Install the O-ring 1 to insulator 2 .
• Install the O-ring 3 to intake pipe 4 .
The removed o-rings must be replaced with new ones
to prevent air from sucking the joint.
• Tighten the intake pipe bolts to the specified torque.
Intake pipe bolt: 6 N·m (0.6 kgf-m, 4 lb-ft)
Initial: 10 N·m (1.0 kgf-m, 7 lb-ft)
Final: 14 N·m (1.4 kgf-m, 10.0 lb-ft)
2-8)
(or equivalent grease)
ENGINE 3-77