Suzuki LT-Z90 Manual page 115

• Install the oil pump cover 4 .
STARTER CLUTCH AND GENERATOR ROTOR
• Apply engine oil to the starter driven gear bearing and crank-
shaft.
• Install the starter driven gear 1 .
• Degrease the tapered portion of generator rotor and also the
crankshaft. Use nonflammable cleaning solvent to wipe off
oily or greasy matter and make these surfaces completely
dry.
• Install the key 2 .
• Install the generator rotor 3 .
• Tighten the generator rotor nut to the specified torque with the
special tool.
Generator rotor nut: 80 N·m (8.0 kgf-m, 58 lb-ft)
09930-44520: Rotor holder
ENGINE 3-67