Installation - Suzuki LT-Z90 Manual

5-30 CHASSIS

INSTALLATION

Install the handlebars in the reverse order of removal. Pay atten-
tion to the following points:
• Apply adhesive agent to the handlebar right and left end and
right and left grip inner wall.
HANDLE GRIP BOND (commercial available)
• Align the punched mark A on the handlebars with the mating
surface B of handlebar holder.
• First tighten the bolts 1 to the specified torque, and then
tighten the bolts 2 to the specified torque.
Handlebar clamp bolt: 25 N·m (2.5 kgf-m, 18.0 lb-ft)
NOTE:
The higher portion of handlebar holder must face forward, so
that the clearance C of holder is in back of the handlebars.
• Align the punched mark D on the handlebars with the mating
surface E of left brake lever holder 3 .
• Align the punched mark F on the handlebars with the mating
surface G of left handle switch 4 .
Apply handle
grip bond.
Handlebars
Forward
Apply handle
grip bond.