Reducing/Enlarging Photos To Standard Size (Photo Zoom Key) - Gestetner CS331 Copying Manual

Gestetner cs331: operators manual
Table of Contents

Advertisement

Reducing/Enlarging Photos to Standard Size (Photo Zoom Key)

Use the PHOTO ZOOM key for reduction/enlargement of photos as originals. There are four types of
photo sizes as set items, however, the desired size other than these four can be set.
- Place a photo on the original glass in a landscape direction. Select the same direction for the paper to
be copied.
- The area 2 mm from the edge is not printed out.
* Set the size for "the OTHER" key as required (
other than LD, LG, LT or ST, you will select the OTHER key on the screen of step 5 below. Before
pressing it, you need to make the OTHER key recognize the same size as the originals or paper that
have been set.
1
Place paper in the drawer(s).
- When using this mode in bypass copying (
be sure to specify the paper size.
2
Place the original(s) (photos).
3
Press the drawer icon representing the desired copy
paper size, then press the ZOOM... key.
- The copy paper size is selectable on the screen of step 5
as well.
4
Press the PHOTO ZOOM key.
Page 6-16). When the set paper is a standard size
Page 2-4
Page 6-5),
Page 2-9
1
2
3
4
5
6
7
8
9
10
11
12
3-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sdc531Lc031Aficio color 3131

Table of Contents