Edge Erase - Gestetner CS331 Copying Manual

2. EDGE ERASE

If your original has a dirty or torn edge, it may be reproduced as a black stain on the copy. In that case,
1
use Edge Erase Copying. A white border is created along the edges of the copy, eliminating those black
stains.
2
3
4
1
Place paper in the drawer(s).
- When using this mode in bypass copying (
be sure to specify the paper size.
5
2 Place the original(s).
3
Press the EDIT key to enter the editing menu, and
6
press the EDGE ERASE key.
7
8
4 Adjust the width of the white border, then press the
SET key.
9
- The default width of the white border is 5 mm.
- To adjust the width, press the
select the desired number, then press the SET key.
10
11
Select other copy modes as required.
5
Press the
12
5-4
USING THE EDITING FUNCTIONS
Page 2-4
Page 2-9
2mm or 20mm
START key.
Page 6-5),
key to