Paper Misfeed In The Automatic Duplexer (Optional) - Gestetner CS331 Copying Manual

Paper Misfeed in the Automatic Duplexer (optional)

1
Remove the copy receiving tray.
- If a finisher (optional) is attached, first pull it away slowly
from the copier by pushing the release lever.
Caution
Be careful not to let your fingers be caught between the
equipment and the finisher (optional).
This could injure you.
2
Open the exit cover.
3 Put down the lower guide of the exit side and remove
any misfed paper.
Lower guide of
exit side
1
2
3
4
5
6
7
8
9
10
11
12
9-13