Setting The Paper Size Using The Control Panel - Gestetner DSm755 Printer Reference

Printer/scanner unit type 7500;
Hide thumbs Also See for DSm755:
Table of Contents

Advertisement

Setting the Paper Size Using the Control Panel

Follow the procedure below to set the machine using the control panel when
loading standard size paper onto the bypass tray.
Important
❒ The following procedures are not required if you select [Driver / Command]
from [Bypass Tray Setting Priority] in [System] of [Printer Features] (see "Printer
Features", General Settings Guide). In that case, set the paper size using the
printer driver. For details, see General Settings Guide.
❒ If you select [Machine Settings] from [Bypass Tray Setting Priority] in [System] of
[Printer Features] (see "Printer Features", General Settings Guide), the settings
made using the control panel have priority over the printer driver settings.
❒ If the printer driver is not used, select [Machine Settings] from [Bypass Tray Set-
ting Priority] in [System] of [Printer Features] (see "Printer Features", General Set-
tings Guide). Set paper size using the control panel.
A
Press the {User Tools/Counter} key on the control panel.
B
Press [System Settings].
C
Press the [Tray Paper Settings] tab.
D
Press [Printer Bypass Paper Size].
E
Select the paper size.
F
Press [OK].
G
Press the {User Tools/Counter} key.
The initial screen appears.
Note
❒ When loading OHP transparencies or thick paper, set paper size and paper
type.
Reference
For printer driver settings, see the printer driver Help.
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsm775Dsm7657500

Table of Contents