Gestetner CS331 Copying Manual page 21

ACCESS CODE key
Press this key to administer the users of the copier by the access code. Press this key again when you
finish making copies so that the next person must enter his/her own access code to make the copier
available again.
FUNCTION CLEAR key
When this key is pressed, all selected copy modes are cleared to default settings.
* Automatic Function Clear
STOP key
Use this key to stop an ongoing scan and copy operation.
START key
Press this key to start copying.
Digital keys
Use these keys to enter the number of copies you want to make and so on.
C CLEAR key
Use this key to correct numbers entered with the digital keys such as an incorrect copy quantity.
COLOR MODE SELECTION key
AUTO COLOR
The type of original is automatically recognized. Colored originals are color-copied and black and white
originals are copied in black and white.
FULL COLOR
Regardless of color, all originals are color-copied.
BLACK
Regardless of color, all originals are copied in black and white.
7 8
ACCESS
CLEAR
13
Page 1-9
Right bottom of this page
9
10
FUNCTION CLEAR
STOP
START
11
12
Page 2-18
PRINT key
If you press the PRINTER/NETWORK key when
the optional printer controller is installed, the PRINT
key is displayed on the touch panel(
Press this key if you want to start printing immediately
after copying has been finished. (If it is not pressed,
printing automatically starts in 45 seconds.)
Automatic Function Clear
Even if you do not press the
key, within the specified period of time after copying
is finished or after the last key is pressed in a copy
procedure, the automatic function clear mode will work
to clear all settings to defaults, and the basic screen
will be displayed. While the department management
function is being operated, the display returns to the
access code input screen.
Page 2-2
Page 8-4).
FUNCTION CLEAR
Page 1-9
1
2
3
4
5
6
7
8
9
10
11
12
1-5