Gestetner CS213d Copy Reference Manual
  1. Manuals
  2. Brands
  3. Gestetner Manuals
  4. Copier
  5. CS213d
  6. Copy reference manual

Gestetner CS213d Copy Reference Manual

Gestetner cs213d: user guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Cattleya2_savin_copy_EN_Cov14.fm Page 1 Monday, September 11, 2000 8:40 PM
$ $/
Operating Instructions
<Copy Reference>
SAVIN CORPORATION
Type for Savin SDC413/CS213d
(S1407)
Printed in Japan
8( 86$ %

Advertisement

Table of Contents
loading

Related Manuals for Gestetner CS213d

Summary of Contents for Gestetner CS213d

  • Page 1 Cattleya2_savin_copy_EN_Cov14.fm Page 1 Monday, September 11, 2000 8:40 PM $ $/ Operating Instructions <Copy Reference> SAVIN CORPORATION Type for Savin SDC413/CS213d (S1407) Printed in Japan 8( 86$ %...
  • Page 2 Cat2-5_FM.book Page 1 Thursday, December 14, 2000 4:36 PM Introduction This manual contains detailed instructions on the operation and maintenance of this machine. To get maximum versatility from this machine all operators should carefully read and follow the instructions in this manual.
  • Page 3 Cat2-5_FM.book Page i Thursday, December 14, 2000 4:36 PM Notice Do not make copies of any item for which copying is prohibited by law. Copying the following items is normally prohibited by local law: Bank bills, revenue stamps, bonds, stock certificates, bank drafts, checks, pass- ports, driver's licenses.

  • Page 4: Safety Information

    Cat2-5_FM.book Page ii Thursday, December 14, 2000 4:36 PM Safety Information When using your equipment, the following safety precautions should always be followed. Safety During Operation In this manual, the following important symbols are used: R WARNING: Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury.
  • Page 5 Cat2-5_FM.book Page iii Thursday, December 14, 2000 4:36 PM R CAUTION: • Protect the equipment from dampness or wet weather, such as rain, snow, and so on. • Unplug the power cord from the wall outlet before you move the equipment. While moving the equipment, you should take care that the power cord will not be damaged under the equipment.

  • Page 6: Energy Star Program

    To conserve energy, this product automatically turns off 90 minutes after the last copying or printing job has been completed. Printing is available in this mode, but if you use the copier, press the operation switch. For details about how to change the default interval, see “Auto Timer” ⇒...
  • Page 7 Recycled Paper In accordance with the ENERGY STAR Program, we recommend use of recycled paper which is environment friendly.Please contact your sales representative for recommended paper. Printed Matters Copier only Printer installed 190 W 230 W 15 minutes 15 minutes 320 sec.

  • Page 8: How To Read This Manual

    Cat2-5_FM.book Page vi Thursday, December 14, 2000 4:36 PM How to Read this Manual Symbols In this manual, the following symbols are used: R WARNING: This symbol indicates a potentially hazardous situation that might result in death or serious injury when you misuse the machine without following the in- structions under this symbol.

  • Page 9: Table Of Contents

    Cat2-5_FM.book Page vii Thursday, December 14, 2000 4:36 PM TABLE OF CONTENTS What You Can Do with This Machine ... 2 Guide to Components ... 4 Options ... 6 Operation Panel ... 7 Using the Touch Panel Display ... 9 Selecting Functions...
  • Page 10 Cat2-5_FM.book Page viii Thursday, December 14, 2000 4:36 PM Reduce/Enlarge ... 58 Preset R/E... 58 Zoom ... 60 Size Magnification ... 61 Directional Magnification (%) ... 63 Directional Size Magnification (mm)... 64 Poster Mode... 66 Duplex... 69 1 Sided → 2 Sided ... 69 2 Sided →...
  • Page 11 Cat2-5_FM.book Page ix Thursday, December 14, 2000 4:36 PM 3. Image Overlay (Option) What is Image Overlay? ... 125 Edit Background... 128 Color/Image Adjustment... 128 Color Creation ... 129 Basic Settings... 130 4. Adjustment and Color Memory Color Balance ... 131 Color Balance Adjustment...
  • Page 12 Accessing the User Tools ... 211 Exiting from the User Tools... 212 Setting You can Change with the User Tools (System Settings) ... 213 Settings You can Change with the User Tools (Copier Features) ... 217 8. Others Do's and Don'ts ... 227 Where to Put Your Machine...
  • Page 13 Cat2-5_FM.book Page xi Thursday, December 14, 2000 4:36 PM Use and Storage of Supplies... 233 Copy Paper ... 233 Paper Storage ... 234 Toner Storage ... 234 9. Specification Mainframe... 235 Document Feeder (Option) ... 239 20-bin Sorter Stapler (Option) ... 240 Large Capacity Tray (LCT) (Option)...
  • Page 14 Cat2-5_FM.book Page xii Thursday, December 14, 2000 4:36 PM Printed Matters...
  • Page 15 Cat2-5_FM.book Page 1 Thursday, December 14, 2000 4:36 PM Printed Matters...

  • Page 16: What You Can Do With This Machine

    Cat2-5_FM.book Page 2 Thursday, December 14, 2000 4:36 PM What You Can Do with This Machine Printed Matters...
  • Page 17 Cat2-5_FM.book Page 3 Thursday, December 14, 2000 4:36 PM Printed Matters...

  • Page 18: Guide To Components

    Cat2-5_FM.book Page 4 Thursday, December 14, 2000 4:36 PM Guide to Components Exposure glass Position originals here face down for cop- ying. Platen cover (option) Lower this cover over originals placed on the exposure glass for copying. Operation switch Press this switch to turn the power on (the On indicator goes on).
  • Page 19 Cat2-5_FM.book Page 5 Thursday, December 14, 2000 4:36 PM Stopper When you copy onto thin paper, raise this to prevent curling. Copy tray Completed copies are delivered here. Ventilation hole Prevents overheating. Do not obstruct the ventilation hole by placing or leaning an object near it.

  • Page 20: Options

    Cat2-5_FM.book Page 6 Thursday, December 14, 2000 4:36 PM Options This machine can be provided with the following options: Platen cover Lower this cover over originals placed on the exposure glass for copying. Document feeder (ADF) Insert a stack of originals here. They will be fed automatically.

  • Page 21: Operation Panel

    Cat2-5_FM.book Page 7 Thursday, December 14, 2000 4:36 PM Operation Panel Screen Contrast knob You can change the brightness of the dis- play. { { { { Special Accessory} } } } key This key is not used for this machine. { { { { User Tools} } } } key Press to change the default setting.
  • Page 22 Cat2-5_FM.book Page 8 Thursday, December 14, 2000 4:36 PM { { { { Clear/Stop} } } } key Press to cancel the copy number entered. While copying, press to stop copying. This key is also used to clear data. { { { { Start} } } } key Press to start copying.

  • Page 23: Using The Touch Panel Display

    Cat2-5_FM.book Page 9 Thursday, December 14, 2000 4:36 PM Using the Touch Panel Display Selecting Functions On the touch panel display, you can find keys, instructions and messages. By pressing keys on the display, you can select or deselect functions, and enter data for the selected modes.

  • Page 24: Entering Numbers

    Cat2-5_FM.book Page 10 Thursday, December 14, 2000 4:36 PM Entering Numbers When the display prompts you to enter a number, type in the number with the number keys and press the [#] key on the display to accept it. Should you make a mistake: •...

  • Page 25: Color Sample Chart

    Cat2-5_FM.book Page 11 Thursday, December 14, 2000 4:36 PM Color Sample Chart This is the User Color sample. You can mix the basic colors to make your own colors (User Color). Note ❒ The color sample might differ somewhat from actual copies due to printing effects.
  • Page 26 Cat2-5_FM.book Page 12 Thursday, December 14, 2000 4:36 PM Printed Matters...

  • Page 27: Basics

    Cat2-5_FM.book Page 13 Thursday, December 14, 2000 4:36 PM Turning On the Power To start the machine, press the operation switch to turn the power on. Note ❒ This machine automatically enters Energy Saver mode or turns itself off if you do not use the machine for a while.

  • Page 28: Starting The Machine

    Cat2-5_FM.book Page 14 Thursday, December 14, 2000 4:36 PM Basics Starting the Machine Press the operation switch to make the On indicator go on. Note ❒ If the power is not turned on when the operation switch is pressed, check if the main power switch is on.
  • Page 29 Cat2-5_FM.book Page 15 Thursday, December 14, 2000 4:36 PM Shutting down the machine Press the operation switch to make the On indicator go off. Turning off the main power Turn off the main power switch. The main power indicator of the operation panel goes off. Printed Matters Turning On the Power...

  • Page 30: Originals

    Cat2-5_FM.book Page 16 Thursday, December 14, 2000 4:36 PM Basics Originals Standard Size Originals The machine will detect the following sizes and directions as standard size orig- inals: ❖ ❖ ❖ ❖ When you place originals on the exposure glass Metric version Inch version ❖...

  • Page 31: Non-Recommended Originals For The Document Feeder

    Cat2-5_FM.book Page 17 Thursday, December 14, 2000 4:36 PM Non-recommended Originals for the Document Feeder Note ❒ The following types of originals are not recommended for use with the docu- ment feeder. Place them directly on the exposure glass. • Originals thicker than 128g/m •...

  • Page 32: Placing Originals On The Exposure Glass

    Cat2-5_FM.book Page 18 Thursday, December 14, 2000 4:36 PM Basics Placing Originals on the Exposure Glass Lift the platen cover or the document feeder. Place the original face down on the exposure glass. The original should be aligned to the rear left corner. Reference mark Scale Note...

  • Page 33: Loading A Stack Of Originals In The Document Feeder

    Cat2-5_FM.book Page 19 Thursday, December 14, 2000 4:36 PM Loading a Stack of Originals in the Document Feeder You can insert a stack of originals into the document feeder. These originals are individually fed onto and removed from the exposure glass. Note ❒...
  • Page 34 Cat2-5_FM.book Page 20 Thursday, December 14, 2000 4:36 PM Basics Load the originals face up into the document feeder until the Insert Origi- nal indicator goes off. Limit mark Original guide Note ❒ The last page should be on the bottom. ❒...

  • Page 35: Loading One Original At A Time In The Document Feeder

    Cat2-5_FM.book Page 21 Thursday, December 14, 2000 4:36 PM Loading one Original at a Time in the Document Feeder If you set one original at a time in the document feeder, the second and subse- quent originals can be fed and copied automatically without pressing the {Start} key.
  • Page 36 Cat2-5_FM.book Page 22 Thursday, December 14, 2000 4:36 PM Basics While the Auto Feed indicator is lit after an original is fed, load the next original. The original is automatically fed and copied. Note ❒ You can adjust the time the machine waits before being ready for the next original with the user tools.

  • Page 37: Loading Originals Of Different Sizes In The Document Feeder

    Cat2-5_FM.book Page 23 Thursday, December 14, 2000 4:36 PM Loading Originals of Different Sizes in the Document Feeder Preparation To use this function, you have to select ADF Mixed Sizes mode with the user tools. ⇒ P.223 “Duplex/ADF/Sorter”. You can insert a stack of originals of different standard sizes (e.g. A4, B5 etc.) into the document feeder.

  • Page 38: Placing Custom Sized Originals

    Cat2-5_FM.book Page 24 Thursday, December 14, 2000 4:36 PM Basics Placing Custom Sized Originals When copying from custom sized originals, enter the original size so that the copy is well aligned. Limitation ❒ You must place your custom size originals on the exposure glass. Reference For details about the standard sizes the machine can detect, ⇒...
  • Page 39 Cat2-5_FM.book Page 25 Thursday, December 14, 2000 4:36 PM Press the [Orig. Vert.] key and enter the vertical size with the number keys, and then press the [#] key. Press the [OK] key. Place your original on the exposure glass, and then press the { { { { Start} } } } key. Printed Matters Placing Custom Sized Originals...

  • Page 40: Removing The Platen Cover To Copy A Large Original

    ❒ Lift the platen cover with both hands. Place the removed cover on a flat sur- face where it will not be damaged. To reset the platen cover, align the pins of the platen cover and the holes of the copier. Then push the platen cover onto the copier. Printed Matters...

  • Page 41: Copying

    Cat2-5_FM.book Page 27 Thursday, December 14, 2000 4:36 PM Basic Procedure Place your original on the exposure glass or in the document feeder. Make sure that the [Auto Color Select], [Text / Photo], [Auto Paper Select], [Full Size] keys are selected. Note ❒...

  • Page 42: Adjusting Copy Image Density

    Cat2-5_FM.book Page 28 Thursday, December 14, 2000 4:36 PM Copying Press the { { { { Start} } } } key. Note ❒ To stop the machine during a multi-copy run, press the {Clear/Stop} key. ❒ If you want to change the settings, press the [Yes] key. If you want to resume the copy run, press the [Resume] key.
  • Page 43 Cat2-5_FM.book Page 29 Thursday, December 14, 2000 4:36 PM Manual image density If you require darker or lighter copies, adjust the image density yourself. If the [Auto Image Density] key is selected, press it to cancel it. Press the desired color density level. Combined auto and manual image density Use when copying originals with a dirty background (such as newspapers).

  • Page 44: Selecting A Color Mode

    Cat2-5_FM.book Page 30 Thursday, December 14, 2000 4:36 PM Copying Selecting a Color Mode Select a color mode that best suits your originals and copying requirements. Auto color select mode The machine automatically detects whether the original has color parts or not. Originals with only black images will be copied in Black &...
  • Page 45 Cat2-5_FM.book Page 31 Thursday, December 14, 2000 4:36 PM Black & White copy mode This function makes copies in black. Press the [Black & White] key. Place your originals, and then press the { { { { Start} } } } key. Single color mode This function makes copies in single colors.
  • Page 46 Cat2-5_FM.book Page 32 Thursday, December 14, 2000 4:36 PM Copying Press the [OK] key. Place your originals, and then press the { { { { Start} } } } key. User colors Note ❒ When Single Color copying, user colors might come out lighter. Press the [Single Color] key.
  • Page 47 Cat2-5_FM.book Page 33 Thursday, December 14, 2000 4:36 PM Scanned color The optional editing kit is required to use this function. Note ❒ “Scanned color” means that the color is specified from the original image di- rectly. ❒ When Single Color copying, Scanned colors might come out lighter. Press the [Single Color] key.

  • Page 48: Twin Color Mode

    Cat2-5_FM.book Page 34 Thursday, December 14, 2000 4:36 PM Copying Press the color on the image you wish to scan in with the editor pen. Note ❒ Point to an area of color with a radius of at least 5 mm. ❒...
  • Page 49 Cat2-5_FM.book Page 35 Thursday, December 14, 2000 4:36 PM Twin Color (Color Copy) Press the [Twin Color] key. Select the color you want to copy the color parts of the original in. If you wish to copy black parts using a different color, press the [Change Black] key. Note ❒...

  • Page 50: Selecting The Original Image Type

    Cat2-5_FM.book Page 36 Thursday, December 14, 2000 4:36 PM Copying Place your originals, and then press the { { { { Start} } } } key. Selecting the Original Image Type To optimize the likeness between copies and originals, select an image type that matches your originals.
  • Page 51 Cat2-5_FM.book Page 37 Thursday, December 14, 2000 4:36 PM Make sure that the [Text / Photo] key is selected. Note ❒ If not, press the [Text / Photo] key. Select the photo mode. Place your originals, and then press the { { { { Start} } } } key. Text mode This modes is suitable for copying originals consisting of characters, line dia- grams, and letters, but not photographic images.
  • Page 52 Cat2-5_FM.book Page 38 Thursday, December 14, 2000 4:36 PM Copying Photo mode This mode is suitable for copying originals consisting of pictures, photographs, and screened letters/areas, but not solid letters. Note ❒ There are 3 types of Photo mode: • [Press Print]: Use when copying photographs or pictures that are printed on paper (e.g.

  • Page 53: Selecting The Copy Paper Size

    Cat2-5_FM.book Page 39 Thursday, December 14, 2000 4:36 PM Select the original type from the [Highlight Pen], [Inkjet Output], and [Map] key. Place your originals, and then press the { { { { Start} } } } key. Selecting the Copy Paper Size Select a suitable size of copy paper based on the original size and the reproduc- tion ratio.

  • Page 54: Image Rotation

    Cat2-5_FM.book Page 40 Thursday, December 14, 2000 4:36 PM Copying Manual paper select You can select the copy paper manually. Select the copy paper. - Image Rotation If the direction in which your original is set (landscape or portrait) is different from the paper you are copying onto, this function rotates the original image by 90°...

  • Page 55: Copying From The Bypass Tray

    Cat2-5_FM.book Page 41 Thursday, December 14, 2000 4:36 PM Copying from the Bypass Tray Use the bypass tray to copy onto thick paper, adhesive labels, OHP transparen- cies, or custom size paper. Also use the bypass tray to copy onto the reverse side of paper that has already been copied onto.
  • Page 56 Cat2-5_FM.book Page 42 Thursday, December 14, 2000 4:36 PM Copying ❒ Select one of the following settings or keys: • [Normal]: normal paper, adhesive labels • [Thick]: thick paper, post cards, translucent paper • [Extra Thick]: Heavier than 157g/m • [OHP]: OHP transparencies •...
  • Page 57 Cat2-5_FM.book Page 43 Thursday, December 14, 2000 4:36 PM Copying onto standard size paper with the bypass tray Note ❒ When you copy onto the reverse side of paper that has been already copied onto, ⇒ P.49 “Copying onto the reverse side of paper”. Open the bypass tray.
  • Page 58 Cat2-5_FM.book Page 44 Thursday, December 14, 2000 4:36 PM Copying Adjust the paper guides to the paper size. Horizontal size Vertical size Note ❒ Make sure the paper size and direction in the bypass tray is displayed on the operation panel. ❒...
  • Page 59 Cat2-5_FM.book Page 45 Thursday, December 14, 2000 4:36 PM Copying onto custom size paper with the bypass tray Preparation You can register custom paper sizes you use often in keys [Custom 1], [Custom2], and [Custom3] with the user tools. ⇒ P.213 “System settings”. Note ❒...
  • Page 60 Cat2-5_FM.book Page 46 Thursday, December 14, 2000 4:36 PM Copying If you select [Enter Size] in step D D D D , enter the horizontal paper size with the number keys, and then press the [#] key. Note ❒ To change the value entered, press the [Clear] key and enter a new value. Enter the vertical paper size with the number keys, and then press the [#] key.
  • Page 61 Cat2-5_FM.book Page 47 Thursday, December 14, 2000 4:36 PM Making A3, 11" × × × × 17" full bleed copies By sliding the paper guides of the bypass tray to a size greater than A3 (11"), A3 11" × 17" full bleed copying mode is automatically selected. In this mode, you can make A3, 11"...
  • Page 62 Cat2-5_FM.book Page 48 Thursday, December 14, 2000 4:36 PM Copying ❒ By sliding the paper guides of the bypass tray, the machine enters A3, 11" × 17" full bleed copying mode automatically. ❖ ❖ ❖ ❖ Left guide ❖ ❖ ❖ ❖ Right guide Printed Matters...
  • Page 63 Cat2-5_FM.book Page 49 Thursday, December 14, 2000 4:36 PM Copying onto the reverse side of paper You can copy onto the reverse side of paper that has been already copied onto. Note ❒ If you wish to copy on both sides of the paper, use the Duplex feature. ⇒ P.69 “Duplex”.
  • Page 64 Cat2-5_FM.book Page 50 Thursday, December 14, 2000 4:36 PM Copying ❒ You cannot use this function for OHP transparencies, translucent paper, ad- hesive labels and postcards. ❒ Do not use copy paper that has been already copied onto by other machines. ❒...

  • Page 65: Auto Reduce/Enlarge

    Cat2-5_FM.book Page 51 Thursday, December 14, 2000 4:36 PM Auto Reduce/Enlarge The machine can select the proper reproduction ratio based on the selected pa- per size and the original size. Reference Regarding other functions that cannot be used together with this function, ⇒ P.121 “Combination Chart”.

  • Page 66: Energy Saver Mode

    Cat2-5_FM.book Page 52 Thursday, December 14, 2000 4:36 PM Copying Energy Saver Mode If you do not operate the machine for a certain period after copying or press the {Energy Saver} key, the display goes out and the machine enters Energy Saver mode.

  • Page 67: Interrupt Copying

    Cat2-5_FM.book Page 53 Thursday, December 14, 2000 4:36 PM Interrupt Copying Use the {Interrupt} key to interrupt a copy run and make urgently needed copies. Reference Regarding other functions that cannot be used together with this function, ⇒ P.121 “Combination Chart”. Press the { { { { Interrupt} } } } key.

  • Page 68: Auto Start

    Cat2-5_FM.book Page 54 Thursday, December 14, 2000 4:36 PM Copying Auto Start If you press the {Start} key during the warm-up period, the {Start} key will blink and the machine will start copying after the warm-up period. Set your copy settings during the warm-up period. Press the { { { { Start} } } } key.

  • Page 69: Program

    Cat2-5_FM.book Page 55 Thursday, December 14, 2000 4:36 PM Program You can store up to five frequently used copy job settings in machine memory and recall them for future use. Note ❒ If you want to change a stored program, overwrite the program. Storing your settings Set the copy settings you want to put into memory.
  • Page 70 Cat2-5_FM.book Page 56 Thursday, December 14, 2000 4:36 PM Copying Recalling your settings Press the { { { { Program} } } } key. Note ❒ If you want to recall Area Edit settings stored in a program, press the [Area Editing] key, and then press the {Program} key.

  • Page 71: Check Modes

    Cat2-5_FM.book Page 57 Thursday, December 14, 2000 4:36 PM Basic Procedure Check Modes By pressing the [Check Modes] key, you can see at a glance the modes you have selected. Counter By pressing the {Counter} key, you can check the machine's counter. Printed Matters...

  • Page 72: Reduce/Enlarge

    Cat2-5_FM.book Page 58 Thursday, December 14, 2000 4:36 PM Copying Reduce/Enlarge Preset R/E Reference Regarding other functions that cannot be used together with this function, ⇒ P.121 “Combination Chart”. Note ❒ You can add up to two preset ratios with the user tools. ⇒ P.217 “General Fea- tures”.
  • Page 73 Cat2-5_FM.book Page 59 Thursday, December 14, 2000 4:36 PM Select the ratio you require. Place your originals, and then press the { { { { Start} } } } key. Enlarging Press the [Reduce/Enlarge] key. Make sure that the [Preset R/E / Zoom] key is selected. Select the ratio you require.

  • Page 74: Zoom

    Cat2-5_FM.book Page 60 Thursday, December 14, 2000 4:36 PM Copying Zoom You can change the reproduction ratio from 25% to 400% in 1% steps. Note ❒ You can select a ratio regardless of the size of an original or copy paper. With some ratios, parts of the image might not be copied or blank margins will ap- pear on copies.

  • Page 75: Size Magnification

    Cat2-5_FM.book Page 61 Thursday, December 14, 2000 4:36 PM Using the number keys Press the [Reduce/Enlarge] key. Press the [Input Ratio] keys. Enter the reproduction ratio with the number keys. Note ❒ To change the ratio entered, press the [Clear] key and enter a new ratio. Press the [#] key.
  • Page 76 Cat2-5_FM.book Page 62 Thursday, December 14, 2000 4:36 PM Copying ❒ You can select a ratio from between 25% to 400%. ❒ Up to 999mm (metric version), 99.99" (inch version) can be entered. Press the [Reduce/Enlarge] key. Press the [Size Magnification] key. Enter the original size with the number keys, and then press the [#] key.

  • Page 77: Directional Magnification (%)

    Cat2-5_FM.book Page 63 Thursday, December 14, 2000 4:36 PM Directional Magnification (%) Horizontal % Vertical % Copies can be reduced or enlarged at different reproduction ratios horizontally and vertically. Note ❒ You can select a ratio from between 25% to 400%. ❒...

  • Page 78: Directional Size Magnification (Mm)

    Cat2-5_FM.book Page 64 Thursday, December 14, 2000 4:36 PM Copying Enter the vertical ratio with the number keys, and then press the [#] key. Place your originals, and then press the { { { { Start} } } } keys. Directional Size Magnification (mm) Horizontal original size Vertical original size...
  • Page 79 Cat2-5_FM.book Page 65 Thursday, December 14, 2000 4:36 PM Press the [Reduce/Enlarge] key. Press the [Directional Mag.] key. Press the [D. Size Mag.(mm)] key. Enter the horizontal original size with the number keys, and then press the [#] key. Note ❒...

  • Page 80: Poster Mode

    Cat2-5_FM.book Page 66 Thursday, December 14, 2000 4:36 PM Copying Poster Mode You can enlarge the complete image of originals onto several sheets. This func- tion is convenient for making posters. Note ❒ In this function, the copies are delivered with margins around the copy image (about 15mm, 0.6").
  • Page 81 Cat2-5_FM.book Page 67 Thursday, December 14, 2000 4:36 PM Using the [Number of Pages] key By entering the desired number of pages, the machine automatically calculates the suitable enlargement ratio for copying. Select the copy paper size. Press the [Reduce/Enlarge] key. Press the [Poster Mode] key.
  • Page 82 Cat2-5_FM.book Page 68 Thursday, December 14, 2000 4:36 PM Copying Press the [Poster Mode] key. Press the [Direct. Mag.(%)] key. Enter the ratio. Note ❒ You can specify different ratios or numbers or pages in the horizontal and vertical directions. Press the [#] key.

  • Page 83: Duplex

    Cat2-5_FM.book Page 69 Thursday, December 14, 2000 4:36 PM Duplex 1 Sided → → → → 2 Sided This function makes double sided copies from single sided originals. Limitation ❒ You cannot use the following kinds of copy paper with this function: •...
  • Page 84 Cat2-5_FM.book Page 70 Thursday, December 14, 2000 4:36 PM Copying Reference Regarding other functions that cannot be used together with this function, ⇒ P.121 “Combination Chart”. ❖ ❖ ❖ ❖ The resulting copy image will differ according to the direction in which you place your original (lengthwise K The illustrations show the directions of copied images on the front and back, not the directions delivery.
  • Page 85 Cat2-5_FM.book Page 71 Thursday, December 14, 2000 4:36 PM Press the [1 Sided→ → → → 2 Sided] key. Press the [Even] key or the [Odd] key according to the number of your origi- nals. Note ❒ When you set an odd number of originals, the back side of the last page is left blank.

  • Page 86: 2 Sided → → → → 2 Sided

    Cat2-5_FM.book Page 72 Thursday, December 14, 2000 4:36 PM Copying 2 Sided → → → → 2 Sided This function makes double sided copies from double sided originals. Press the [Duplex/Combine] key. Press the [2 Sided→ → → → 2 Sided] key. Place your originals in the document feeder, and then press the { { { { Start} } } } key.

  • Page 87: Book → 2 Sided

    Cat2-5_FM.book Page 73 Thursday, December 14, 2000 4:36 PM Book → → → → 2 Sided Use this feature to copy facing pages of a book or magazine onto both sides of the copy paper. Note ❒ Select the lengthwise K copy paper. ❒...

  • Page 88: Multi → 2 Sided

    Cat2-5_FM.book Page 74 Thursday, December 14, 2000 4:36 PM Copying Select the lengthwise K Press the [Book→ → → → 2 Sided] key. Place your original on the exposure glass, and then press the { { { { Start} } } } key. Multi →...
  • Page 89 Cat2-5_FM.book Page 75 Thursday, December 14, 2000 4:36 PM Note ❒ The following table summarizes the relationship between the size of originals and copy paper size for full-size copying (100%). • Metric version Original A3 L B4 L A4 L •...

  • Page 90: Series Copies

    Cat2-5_FM.book Page 76 Thursday, December 14, 2000 4:36 PM Copying Series Copies Book → → → → 1 Sided This function makes one-sided copies from two facing pages of bound (book) originals. Reference Regarding functions that cannot be used together with this function, ⇒ P.121 “Combination Chart”.
  • Page 91 Cat2-5_FM.book Page 77 Thursday, December 14, 2000 4:36 PM Press the [Duplex/Combine] key. Select the lengthwise K Press the [Book→ → → → 1 Sided] key. Place your originals, and then press the { { { { Start} } } } key. Printed Matters K copy paper.

  • Page 92: 2 Sided → → → → 1 Sided

    Cat2-5_FM.book Page 78 Thursday, December 14, 2000 4:36 PM Copying 2 Sided → → → → 1 Sided The optional document feeder is required to use this function. Reference Regarding other functions that cannot be used together with this function, ⇒ P.121 “Combination Chart”.

  • Page 93: Combine

    Cat2-5_FM.book Page 79 Thursday, December 14, 2000 4:36 PM Combine Combine 2 Originals The optional document feeder is required to use this function. This function automatically combines two single sided originals onto one copy. Note ❒ If the original size and direction is set differently, you cannot use the combine function.

  • Page 94: Copy Paper

    Cat2-5_FM.book Page 80 Thursday, December 14, 2000 4:36 PM Copying Press the [Duplex/Combine] key. Select the widthwise L Press the [Combine 2 originals] key. Place your originals in the document feeder, and then press the { { { { Start} } } } key. Printed Matters L copy paper.

This manual is also suitable for:

Sdc413

Table of Contents