Gestetner CS331 Copying Manual page 142

2. PROCEDURE OF SCAN SETTING (Cont.)
3 Press the SCAN key.
1
* PRINT key
2
3
4 Press the SCAN key.
4
5
6
5 Set the file name.
- Press the area
right to switch to the file name input screen.
7
8
6 Enter the file name within 31 letters using the
alphabet (touch panel) and numbers (digital keys),
9
then press the SET key.
- Use the following keys as required.
10
Backspace ...Press this key to delete a letter before the cursor.
Space
Cancel
11
C Clear (control panel)...Press this key to delete all letters.
12
If you do not enter any file name here, the file name will
automatically be assigned.
04 07 16 21.
ex)
MM DD HH MM extension
8-4
NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER)
Page 1-5
as shown on the screen on the
...Press these keys to move the cursor.
...Press this key to insert a space.
...Press this key to cancel entry of letters and
go back to the screen in step 5.