Gestetner CS331 Copying Manual page 112

6. USER SELECTION (INITIAL SETTINGS) (Cont.)
1
2
3
- If you do not want to display the message "***** toner is low.
Prepare new toner cartridge.", select the DISABLE key for
'Near Empty'. However, it returns to the ENABLE in the
4
following case.
1. When the toner cartridge is replaced after the message
"Install new ***** toner cartridge. Press HELP" appears
5
2. When the toner counter is cleared (
6
- To change the initial settings of the automatic calibration
and display of "Near Empty", you need to key in the
administrator password (5 digits).
7
- Ask your service technician about setting and changing the
administrator password.
8
- We recommend you to take a memo in order not to forget
the administrator password.
9
10
11
12
6-18
USING THE SPECIAL FUNCTIONS
Page 6-35).