Gestetner CS331 Copying Manual page 34

2. SETTING COPY PAPER (Cont.)
Changing the Paper Size of the Drawer / Setting the Drawer for Special Uses (Cont.)
3 Press the drawer key in which the THICK1 paper (or
1
THIN paper or OHP films) has been set, then select
the THICK1 (or THIN or OHP ) key.
- If the desired key is not shown, press the Next key to switch
2
the screen.
3
4
The setting is completed.
- The paper type that has been set is displayed on the top right
4
of the screen.
- When thick paper is set
5
6
- When OHP films are set
7
8
9
Clearing the drawer for THIN/THICK1/OHP Film
Press the THICK1 paper (or THIN paper or OHP films)
drawer key, then press the THICK1 (or THIN or OHP )
10
key.
- If the desired key is not shown, press the Next key to switch
the screen.
- Replace the paper set in the drawer as required.
11
- When you need to change the paper size of the drawer
Page 2-6
12
2-8
HOW TO MAKE COPIES
Page 1-6