Hole Punching Mode - Gestetner CS331 Copying Manual

5. HOLE PUNCHING MODE

With the optional punching unit attached to the optional finisher (SR930, SR940), you can have your
1
copies punched with holes.
* The paper weight should be in the range of 17 lb. bond to 140 lb. index. Special paper such as OHP
films or labels is excluded.
2
1
Place paper in the drawer(s).
- When using this mode in bypass copying (
3
be sure to specify the paper size.
2 Place the original(s).
4
3 Press the key on the basic screen as shown on the
right (shaded).
5
6
4 Press the HOLE PUNCH key.
7
- If the key for the desired function is not shown, press the
Next key to switch the screen.
Select other copy modes as required.
8
5
Press the
9
Number of punch holes and available paper sizes:
Since the number of punch holes and the distance between
the holes vary depending on the country, purchase a punch
10
unit that meets your requirements. (For details, consult your
service technician.)
11
North America
(Hole Punch Unit Type 3131)
12
7-8
SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS)
Page 2-4
Page 2-9
START key.
Number of punch holes and hole diameter
2/3 holes switchable
(8.0 mm dia.)
Page 6-5),
Available paper sizes
2 holes: LG, LT-R,
3 holes: LD, LT