Table of Contents
Advertisement
4-22
Reports
Report configuration
General information
Report configuration
Information on the spectrum specific to
the measurement type
Measurement reports
A measurement report is used to create detailed documentation on
a measurement. The report contains the results, general information
on the operator and additional measurement information.
Measurement reports are available for the following measurements:
Spectrum, Time waveform, Overall values trend, TrendingSpectrum,
Balancing.
Configuring the measurement report
Which information is contained in the measurement report is
defined in the report configuration. Every measurement has a
standard report configuration that is adequate for most cases. The
standard configuration can be neither edited nor deleted. To create
a new report configuration, proceed as follows:
• Press the MENU key in the result screen.
• Select 'Print' and click on 'Report printouts'.
The report configuration appears (see below).
• Select the 'Reports' field.
• Press the MENU key and click on 'New'.
• Enter a name in the text editor.
• In the 'Common settings' tab, select the entries that are to appear
in the measurement report:
Company: Company name that appears on the report. To change it,
click on the text field. The changed company name is used in all
report configurations.
Logo: Company logo that is printed in the report. Transfer the new
logo using the 'VIBXPERT utility' program (see p. 6-7). File format:
PNG, image size: max. 186 pixels (longest side).
Customer: The customer information is stored globally and can be
accessed by any report configuration. Select the customer from
the menu, or create a new customer as follows:
Left:
Right:
Advertisement
Table of Contents
