Table of Contents
Advertisement
2-32
Getting started - Data transfer
Serial and USB
Patch (RJ 45)
Data transfer
The following data is transferred between VIBXPERT and the PC
either via a direct connection or a network connection:
- Measurement tasks to VIBXPERT (route)
- Measurement results to the PC (route, multimode, templates)
- Machine templates to VIBXPERT
- Software (update)
- Printer drivers to VIBXPERT
- Data backup to the PC
- Data restore to VIBXPERT
- PDF and screenshots to the PC
Measurement tasks, results and machine templates are transferred
using the OMNITREND PC software. All other data are exchanged via
the 'VIBXPERT utility' tool found on the PRÜFTECHNIK CD and that
must be installed locally on the PC. Also, PDF files can be saved to a
USB flash drive, so they can be opened and printed from a PC.
Exchanging data between the measuring device and a PC requires
either a direct connection or a network connection.
Direct connection to PC
- Serial connection: Connect the PC cable VIB 5.430-2 to the
digital port (yellow) and serial port of the computer.
- USB connection: Connect the USB cable VIB 5.330SUSB to the
communication port (green) and USB port of the computer.
Serial
VIB 5.430-2
- Patch connection: Connect the Ethernet cable VIB 5.331 to the
communication port (green) and network card of the computer.
- Patch connection via hub: Connect the Ethernet cable VIB 5.331
to the communication port (green). Connect a standard patch
cable to the network card of the computer. Connect both cables
to a hub.
VIB 5.331
USB
VIB 5.330SUSB
Hub
VIB 5.331
Patch cable
Advertisement
Table of Contents
