Entering An Event/Comment - Fluke VIBXPERT II User Manual

3-26
Options
* Import user-defined events via OMNI-
Enter comment
Open Event Editor

Entering an Event/Comment

You can record information relating to data collection using
predefined events* and freely editable comments. Up to 10 events
can be assigned to every measurement result and every element in
TREND.
a route.
Assigning an event
Prerequisite: The result screen or tree/list view of a route is
displayed.
• Press the MENU key and click on 'Event/Comment' (see below).
The event editor appears.
• Select the relevant event or events in sequence. The selection is
listed in the lower event window.
Entering a comment
• In the event editor press the MENU key again and click on "Enter
comment" (see below).
• Enter the comment and close the text editor. The comment is
displayed below the event window.
Saving
• To save, press the MENU button and click on 'OK'.
A comment icon appears in the result screen next to the channel
name. An event/comment icon appears in the tree/list view next
to the route element (see p. 3-9).

You can edit, delete and add events in the route later on. Events in
the 'Multimode' cannot be edited or deleted.
Note
Left:
Right:
Events
Comments
Comment icon