18
Operation: Measurement
Off-route measurement ('Multimode')
Switch on VIBXPERT.
Start 'Multimode'.
Open tab for overall, signal or
advanced measurements.
Select measurement icon.
Start measurement with ENTER.
• see section 'Basic operating func-
tions'.
• Changing the meas. task -> 1.1
• New / edit task -> 1.2
• Connecting the sensor -> 1.3
• Sensor connection is checked, if
sensor detection is enabled.
• Green LED is flashing during meas:
Trigger OK.
• Blue LED lights up after the meas.:
Measuement OK.
• Live mode: Keep the joystick
pressed when the measurement
starts.
• Repeating the measurement -> 1.4