Table of Contents
Advertisement
2-24
Getting started - Basic settings
*The attachment on page 6-20 con-
tains an overview of the modules and
the available measurement functions.
Registration menu
Units menu
The VIBXPERT PC license automates the
device registration process in OMNI-
Communication
Settings for network communication, see page 2-34.
Registration
The functions and operating modes in VIBXPERT are distributed in
individual modules* that can be enabled by password as required.
VIBXPERT is supplied in the 'Basic' version with which overall values
as well as (limited) spectra can be measured. For example, to enable
the standard 1-channel version, the 'VIBXPERT firmware for 1
channel' module must be registered in VIBXPERT. The corresponding
password can be found on the associated registration certificate:
• Click on 'Registration'.
• Click on the module to be registered and enter the password in
the text editor.
VIBXPERT PC license
Before VIBXPERT can exchange data with OMNITREND, the device
must be registered in OMNITREND. This is generally performed by
entering the PC license password in OMNITREND.
Here you can enter the password in VIBXPERT. The password is
then automatically read into OMNITREND when VIBXPERT first
makes contact with OMNITREND.
Units
The units - where appropriate - are set to SI units in the factory. To
change the unit for the respective measurement quantities, proceed
as follows:
• Click on 'Units'.
• Select the units for the measurement quantities.
The accuracy in decimal places appears in the lower area of the
window for the current unit as well as the conversion factor for
the associated SI unit. It is not yet possible to define, delete or edit
Left:
units. The number of decimal places can not be changed.
To accept the settings, press MENU and click on 'OK'.
Right:
TREND.
Advertisement
Table of Contents
