Table of Contents
Advertisement
General safety
The following notes must be carefully read and completely
understood before the device is put into service.
Risk of injury when measuring on a running machine!
Observe the safety regulations. Install the measurement equip-
ment properly. During measurement on machines with rotating
parts exposed, ensure that no brackets, cables etc. can become
caught in rotating machine parts.
The measurement device may only be operated if it is undam-
aged, dry and clean.
Operation and maintenance are to be performed only by prop-
erly trained personnel.
Repairs to the device may be carried out only by a PRÜFTECH-
NIK-authorized service technician.
Only original spare parts and accessories may be used.
Only properly functioning, regularly-maintained electrical
equipment may be used. Any defects such as broken plugs or
loose sockets must be corrected immediately. Damaged cables
must be replaced by an authorized service technician.
Any alterations that affect device design or operating safety are
not permitted.
Environmental influences
Portable radio-based devices can interfere with proper func-
tioning of the device when operated nearby. In case of doubt,
check the connecting cable between the device and its trans-
ducer.
Avoid exposing the device, its transducers and cables to envi-
ronmental conditions that exceed the tolerances listed in the
'Technical Data' section at the rear of this manual.
Keep the protective caps on the connector sockets when they
are not in use to keep them clean.
How to deal with rechargeable batteries
•
Charge the battery only with the VIBXPERT charger.
•
Maximum charge temperature: 40°C.
•
Follow the safety instructions enclosed with the charger.
•
Do not use damaged batteries!
•
Do not use force to open the battery or throw it in the fire!
•
Do not short-circuit connection contacts!
•
Dispose of used batteries properly in accordance with regula-
tions.
•
Do not send devices with defective batteries by air freight.
•
During extended periods of non-use and during storage, con-
nect VIBXPERT regularly to the mains supply. This prevents the
battery from becoming completely discharged, and the date
and time settings are retained.
Safety and operating notes
1-11
Advertisement
Table of Contents
