Memory Card; For Older Devices - Serial Number 30000 - 39999; For New Devices - From Serial Number 40000; Replacing The Memory Card (Older Devices) - Fluke VIBXPERT II User Manual

2-10
Getting started - Memory card
Attention!

Memory card

For older devices — Serial Number 30000 – 39999
A CompactFlash (CF) card with 2 GB memory capacity is installed in
the VIBXPERT as standard.
Backup all data before replacing the card using the 'VIBXPERT util-
ity' program (see page 6-8)!
When closing the cover, it must be additionally sealed with a sili-
cone adhesive (NOVASIL S 11) to ensure the dust seal (IP 65).
For new devices — from Serial Number 40000
As from serial number 40000 all devices delivered will have a new
processor board. The new processor ARM CPU 800MHz module
includes a built-in CF card for data storage. The built-in CF card,
which cannot be removed, has a capacity of 4 GB of which 2.7 GB is
available for user data.
Although the compartment for a CF card is available, it remains
empty. As a result, the compartment must always remain closed and
sealed.

Replacing the memory card (older devices)

• Switch off VIBXPERT.
• Carefully remove the cover in the grip. Make sure that the clip of
the cover is not damaged.
• Pull out the memory card by the adhesive strip.
Compartment for memory card open —
for older devices (SN 30000 to 39999)
Compartment for memory card
permanently closed and sealed
— for new devices (starting from
SN 40000)
Carefully pull out the memory
card by the adhesive strip