Power; Mains Power Source; Measurement Line Power Source - Fluke 1734 User Manual

1732/1734
Users Manual

Power

The Logger has options for power source:
•
mains
•
measurement line
•
battery
The front panel LED shows the status. See Table 7 for more
information.

Mains Power Source

1. Attach the power supply to the Logger or use the dc power cord to
connect the power supply to the Logger.
2. Move the slide-cover on the power supply to access the mains
socket and connect the power cord into the Logger.
The Logger automatically turns on and is ready to use in
<30 seconds.
3. Push  to turn on and turn off the Logger.
16

Measurement Line Power Source

1. Attach the Power Supply to the Logger or use the dc power cord to
connect the Power Supply to the Logger.
2. Move the slide-cover on the power supply to access the safety
sockets and connect these sockets with the voltage input sockets
A/L1 and N.
For 3-phase delta systems connect the safety sockets of the
power supply with the input sockets A/L1 and B/L2.
Use the short test leads for all applications where the
measured voltage does not exceed the rated input voltage of
the power supply.
3. Connect the voltage inputs to the test points.
The Logger automatically turns on and is ready to use in
<30 seconds.
 Caution
To prevent damage to the product, make sure the
measured voltage does not exceed the input rating of
the power supply.
 Warning
To prevent injury, do not touch the metal parts of one
test lead when the other is still connected to hazardous
voltage.