Table of Contents
Advertisement
measurement must be adapted to one another.
Resonance frequency
The resonant frequency of the sensor is an important influencing
quantity in the shock pulse measurement (bearing condition).
Settling time (RPM)
Settling time of the RPM sensor
Filtering the transducer list
The transducer list can be can filtered according to specific criteria:
• Press the MENU key.
• Click on 'Find'.
• Press the right navigation key wto open the associated submenu.
The following criteria can be selected here:
All:
Display all transducers
Factory:
Display factory-configured transducers only
User:
Display user-configured transducers only
Available:
Display preselected transducers as 'available' only
Meas. quantity: Display the transducers for a specific measurement
quantity only; the measurement quantity is selected
in the associated submenu (see below).
Setting up new transducers
To set up a new transducer, proceed as follows:
• In the transducer list press the MENU key.
• Click on 'New'. The Text Editor appears.
• Enter a name for the new transducer.
• Set up the transducer parameters (see previous page).
• Finally, press the MENU key and click on 'OK' to save the new
transducer.
To accept the settings, press MENU and click on 'OK'.
Getting started - Basic settings
Left:
Sort transducer list:
Display transducers for the 'user-de-
fined' meas. quantity only
Right:
Creating a new transducer
2-21
Advertisement
Table of Contents
