Skoda Citigo 2012 Workshop Manual page 173

Note
The insulating hose on the low-presure line must be at a dis‐
♦
tance -a- of at least 20 mm from the coupling, as otherwise it
is impossible to fit the release tool.
If necessary after removing the dust-protection cap, carefully
♦
cut the insulating hose longitudinally and fold forwards.
– Mount release tool -2- on the refrigerant line -1- and coupling
housing -3- in such a way that the flattened parts on the re‐
lease tool -arrow A- correspond with the flattened parts on the
coupling -arrow B-.
– Insert release tool -1-, beyond a perceptible resistance up to
the stop in -the direction of the arrow-, in the coupling housing
-2-.
– Press release tool -2- against the stop on the refrigerant line
-1-.
– Draw the refrigerant line -1- together with the release tool -2-
from the coupling housing in -the direction of the arrow-.
– Fold up release tool -2- and remove.
Removing gasket
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤
Heating, Air conditioning - Edition 06.2013
7. Quick couplings for refrigerant lines
63