Skoda Citigo 2012 Workshop Manual page 166

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤
Heating, Air conditioning - Edition 06.2013
6.8.1 Vehicles up to MY 2010
Removing
– Remove cap at front bumper in the direction of -arrow-.
– Take off rubber cap -1-.
– Drain the refrigerant circuit with the aid of the A/C service sta‐
tion.
– Press down the cap -3-, remove circlip -2- and pull out cap
-3-.
– Remove bracket -5-.
If there is any resistance use pliers; during this procedure do
not damage the walls of the fluid reservoir -6-.
Install
O-rings -4- are included in the scope of supply of the spare part
dessicator cartridge.
– Remove old O-rings -4- from cap -3-.
– Moisten new O-rings with refrigerant oil and mount on cap
-3-.
– Slide in the desiccator cartridge -5- into the fluid reservoir as
far as the stop.
The top part is resilient.
– Push the cap -3- up to the stop and secure with circlip -2-.
– Fit on rubber cap -1-.
– Further installation occurs in reverse order.
– Fill the refrigerant circuit with the aid of the A/C service station.
6.8.2 Vehicles as MY 2011
Condenser manufactured by Modine
Removing
– Removing the lock carrier ⇒ Body Work; Rep. gr. 50 .
– Release top protective cap from dessicator reservoir using the
socket insert T70.
– Drain the refrigerant circuit with the aid of the A/C service sta‐
tion.
56