Nellcor OxiMax N-550 Service Manual page 87

P a c k i n g f o r S h i p m e n t
Introduction
Returning the N-550
General Instructions
Repacking in Original Carton
N-550
To ship the N-550, for any reason, follow the instructions in this section.
Contact Nellcor's Technical Services Department or your local Nellcor
representative for shipping instructions including a Returned Goods
Authorization (RGA) number. Unless otherwise instructed by Nellcor's
Technical Services Department, it is not necessary to return the sensor or
other accessory items with the N-550. Pack the N-550 in its original shipping
carton. If the original carton is not available, use a suitable carton with
appropriate packing material to protect it during shipping.
Return the N-550 by any shipping method that provides proof of delivery.
Pack the N-550 carefully. Failure to follow the instructions in this section may
result in loss or damage not covered by any applicable Nellcor warranty. If the
original shipping carton is not available, use another suitable carton; North
American customers may call Nellcor's Technical Services Department to
obtain a shipping carton.
Prior to shipping the N-550, contact your supplier or local Nellcor office
(Technical Services Department) for a RGA number. Mark the shipping
carton and any shipping documents with the RGA number. Return the N-550
by any method that provides proof of delivery.
If available, use the original carton and packing materials. See Figure 41.
Pack the N-550 as follows:
77