Nellcor OxiMax N-550 Service Manual page 105

Printout Source
Software Revision Level
Alarm Limits
Column Headings
N-550
Data in the highlighted box above represents the source of the printout, in this
case, the N-550.
The next data field tells the user the software level (Version 1.0.0.0) and a
software verification number (CRC XXXX). Neither of these numbers should
change during normal operation. The numbers will change if the N-550 is
serviced and receives a software upgrade.
The last data field in the top line indicates the upper and the lower alarm
limits for %SpO , the pulse rate (PR), and the SatSeconds alarm limit. In the
2
example above, the low alarm limit for SpO
is 100%. Pulse rate alarm limits are 40 bpm (lower) and 170 bpm (upper). The
SatSeconds alarm limit is set to Off (0 sec.).
Data Port Interface Protocol
is 85% and the upper alarm limit
2
95