Figure 27: Main Pcb Removed - Nellcor OxiMax N-550 Service Manual

Disassembly Guide
Power Supply Removal
64
10. Disconnect the main PCB to front PCB cable from the main PCB
connector item 2.
11. Remove the three remaining screws holding the main PCB to the top case.
12. Carefully lift the main PCB out of the top case. See Figure 27.

Figure 27: Main PCB Removed

1. Perform the procedure Prior to Disassembly on page 56.
2. Perform the procedure Separating Top and Bottom Cases on page 56.