14.1.1 Air Filter Base
– Remove the air filter, b 14.1
: Unscrew the nuts (arrows).
1
: Remove the filter base (1).
– Examine the filter base and
replace it if necessary,
– Before installing the filter base,
lubricate the sealing ring on the
carburetor connector with STIHL
Press Fluid, b 16
– Reassemble parts in reverse
order.
Ensure that the air filter rests
uniformly on the filter base all round.
MS 192 T
14.2
Carburetor, Removing
and Installing
– Remove the air filter, b 14.1
– Remove the filter base, b 14.1.1
: Push out the grommet (1),
examine it and replace it if
necessary.
– Reassemble parts in reverse
order.
1
: Pull the choke lever (1) off the
choke shaft.
1
2
When fitting the choke lever (1) on
the choke shaft (2), ensure that the
flat side of the choke shaft meshes
with the semi-circular recess in the
choke lever.
1
1
: Disconnect the fuel hose (1) from
the carburetor (arrow).
73