Stihl MS 192 T Manual page 19

5.5 Bumper Strips
Bumper strips are fitted on the
engine housing to guide the saw
chain.
Worn bumper strips must be
replaced, otherwise the engine
housing may be damaged.
Remove the sprocket cover and bar
and chain, b 5.1
1
1
: Prise off the bumper strips (1)
with a suitable tool.
: Insert the bumper strips so that
the peg is aligned in the recess
(arrows).
– Reassemble remaining parts in
reverse order.
18
6. Clutch
– Troubleshooting, b 4.1
– Remove the sprocket cover and
bar and chain, b 5.1
1
: Release the twist lock (arrow).
: Remove carburetor box cover (1)
to the rear.
1
: Apply a suitable tool to the tab
(arrow) to prise the boot off the
spark plug (1).
1
: Unscrew the spark plug (1).
1
: Push the locking strip (1)
0000 893 5903 into the spark
plug hole so that "OBEN-TOP"
faces down.
1
: Unscrew the clutch (1).
The clutch has a left-hand thread.
MS 192 T