Stihl MS 192 T Manual page 57

1
Machines with standard starter
grip
: Thread the new rope (1) through
the side of the starter grip.
: Pull the rope out and continue
threading it into the starter grip
from the top.
: Pull the rope through the grip until
the knot at the end of the rope is
in the recess (arrow).
56
1
Machines with ElastoStart starter
grip
: Prise off the cap (1) with a
suitable tool.
: Pull the rope or remaining rope
(1) out of the sleeve.
: Pull the rope (1) through the
sleeve into the starter grip.
– Tie a special knot in the end of
the rope.
1
: Pull the rope (1) with spring and
sleeve into the starter grip.
– Press the cap into the starter grip.
1
1
: Then thread the rope (1) through
the opening (arrow).
1
1
: Thread the rope (1) into the rope
rotor (arrows).
MS 192 T