Stihl MS 192 T Manual page 35

Ensure that the supporting plate
rests securely on the engine
housing at all points (arrows).
: Insert and tighten down the
screw (1).
– Tightening torques, b 3.5
1
: Connect the impulse hose (1) to
the stub (arrow).
34
: Push the insulating plate (1) into
the guides (arrows) until it
engages at the bottom.
– Reassemble remaining parts in
reverse order.
1
8.5
8.5.1
1
: Take out the screws (arrows).
: Apply a suitable tool at the
projections (arrows) of the engine
pan, then tap lightly to release
and lift off the engine pan.
: Remove the crankshaft from the
bearing seats (arrows).
Crankshaft
Removal
MS 192 T