Table of Contents
Advertisement
3.4.5.2 Create VLAN Group
Create Port-Based VLAN
1.
Select <Edit>.
2.
VLAN Name: Type a name for the new VLAN, ex: VLAN01.
3.
Group ID: Type the VLAN group ID.
4.
Member: Press "Space" key to change the member value. There are two types to selected:
Member: the port is a member port.
。
NO: it means that port is NOT a member port.
。
5.
Press "ESC" key to go back action menu line.
6.
Select <Apply> to apply the configuration.
If you have configured the trunk groups, you can see it (ex: Trunk1, Trunk2...) in the port list.
Note
:
You also can configure the trunk group as the VLAN member.
VLAN Configure interface
Advertisement
Table of Contents
