Product Specification - Planet Networking & Communication WGSW-2620P User Manual

24-port 10/100mbps with poe + 2g tp/sfp combo managed ethernet switch
Table of Contents

Advertisement

Gigabit fiber, 802.3af power over Ethernet
High back-plane bandwidth 8.8Gbps
IGMP snooping and IGMP Query mode for Multi-media application
Port mirror and bandwidth control
Supports GVRP function
End point insert mode remote power feeding
Provides extra DC 48V input with redundant function and management power status through
RS-232 port
On line extra power supply testing through RS-232 port
Management by Web/SNMP/Telnet/Console
Port Based VLAN /802.1Q Tag VLAN
IEEE802.3x Flow control – flow control for full duplex, back pressure for half duplex
IEEE802.3ad Port trunk with LACP
Spanning tree protocol IEEE 802.1d/802.1w
IEEE 802.1p class of service
IEEE 802.1x user authentication, TACACS+
Broadcast storm filter
DHCP client/DHCP relay
Support command line interface management
System event log support

1.4 Product Specification

Model
Network Connector
Gigabit Connector
RS-232 connector
Switch architecture
MAC address
Memory
LED
WGSW-2620PV
24-port RJ-45 for 10/100TX
RJ-45 Pin assignment and polarity: 1/2:RX signal and -48V DC; 3/6:TX
signal and +48V DC
2 TP + 2 mini-GBIC
One RS-232 DB-9 female connector for switch management and 2
RS-232 DB-9 male connectors on rear side for DC power supply and
UPS management.
Store and forward switch architecture. Back-plan up to 8.8Gbps
8K MAC address table with Auto learning function
3Mbits for packet buffer
System Power
10/100TX RJ-45 Port: Link/Active, Full-duplex, Power Forwarding
Gigabit Fiber (module): Link/ Activity
Gigabit Copper (module): Link/Activity, Full duplex/collision, 1000Mbps,
100Mbps

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wgsw-2620pv

Table of Contents