Mac Address Configuration - Planet Networking & Communication WGSW-2620P User Manual

3.4.7 MAC Address Configuration

When you add a static MAC address, it remains in the switch's address table, regardless of whether the
device is physically connected to the switch. This saves the switch from having to re-learn a device's
MAC address when the disconnected or powered-off device is active on the network again. You can add /
modify / delete a static MAC address.
3.4.7.1 Static MAC Address
Add the Static MAC Address
You can add static MAC address in switch MAC table.
1. Select <Add> --> <Edit> key to add the static MAC address.
2. MAC Address: Enter the MAC address of the port that should permanently forward traffic,
regardless of the device network activity.
3. Port No.: press "Space" key to select the port number.
4. VLAN ID: select the VLAN ID that the added Mac address belongs to.
5. Press "ESC" to go back action menu line.
6. Select <Apply> to apply all configure value.
MAC Address Configuration interface