Trunk Commands Set - Planet Networking & Communication WGSW-2620P User Manual

show interface
accounting
show bandwidth

3.3.2.3 Trunk Commands Set

Commands
show group
[group-ID]
Interface
show interface statistic
configuratio
counter
n mode
Interface
Display the bandwidth of
configuratio
the values
n mode
Command
Description
Level
Display trunk group
Privileged
information. If there is no
EXEC
group-number in put,
mode
display all trunk groups.
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
show interface
accounting
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
show bandwidth
Defaults Example
Switch # show
group 1
Group Trunk.1:
Ports: 02 03 04
Priority: 0001
Lacp: Enable
Work ports: 0