Port Mirroring Commands Set - Planet Networking & Communication WGSW-2620P User Manual

snmp
system-location
[SystemLocation]
snmp
system-contact
[SystemContact]
snmp
community-strings
[Community] right
[RO | RW]
Or
no snmp
community-strings
[Community]
Snmp-server host
[host-address]
community
community-string
No snmp-server
host

3.3.2.10 Port Mirroring Commands Set

Commands
port monitor
[RX|TX|Both
|Disable] PortList
Or
Global
Set Snmp agent
configuratio
system location
n mode
Global
Set Snmp agent
configuratio
system contact
n mode
Add snmp
community string.
Global Use the no form of
configuratio this command to
n mode remove the
specified
community.
Configure SNMP
Global
server host
configuratio
information and
n mode
community string
Global
Delete the snmp
configuratio
server host setting
n mode
Command
Description
Level
Use the port
Interface
monitor interface
configuratio
configuration
n mode
command to
enable Switch Port
Switch (config)# snmp
N/A
system-location lab
Switch (config)# snmp
N/A
system-contact where
Switch (config)# snmp
PUBLIC
community-strings
RO
public right RW
Switch (config)#
snmp-server host
N/A
192.168.0.10
community rw
Switch (config)# no
N/A
snmp-server host
Defaults Example
Switch (config)#
Interface fastEthernet
N/A
0/8
Switch (config-if)# port