portpri
portplm
save
restore
3.4 Menu Management
After you login to the system, you will see a command prompt. To enter Menu management interface,
enter "menu" command. You will see the main menu interface.
1.
Provide a menu line interface to manage and monitor the switch. User can use windows Hyper
Terminal program through the console port to connect the switch for configuration.
2.
The default user name and password is "admin".
There are 8 selections as follow.
Status and Counters: Show the status of the switch.
。
Switch Configuration: Configure the switch.
。
Protocol Related Configuration: Configure the protocol function.
。
Set port priority for
POE mode
the power supply
management.
Port Power Limit
POE mode
Max Setting
Store current
POE mode
configure
POE mode
Restore to default
Switch (poe)# portpri Set
Port [1~8]=1
Set Port 19847000
Priority (1:Critical, 2:High,
3:Low)
Old=[0], New=2
Switch (poe)# portpplm
Set Port [1~8]=1 Set Port
1 Power Limit Max
Old=[15400],New=20000
Set Port 1 Power Limit
Max 20000
Switch (poe)#save
Switch (poe)#restore