Advanced Setting - Planet Networking & Communication WGSW-2620P User Manual

4.7.2.2 Advanced Setting

Queue Service. After the configuration, click
MAC Address Table Entry
Age-out Time: fill in the number of seconds that an inactive MAC address remains in the switch's
。
address table. The valid range is 300~765 seconds. Default is 300 seconds.
Max Bridge Transmit Delay Bound Control: limit the packets queuing time in switch. If enable,
。
the packets queued exceed will be drop. This valid value are 1sec, 2 sec, 4 sec and off.
Enable Low Queue Delay Bound: limit the low priority packets queuing time in switch. If the low
。
priority packet stays in switch exceed Max Delay Time, it will be sent. The valid range is 1~255 ms.
Make sure of "Max bridge transit delay bound control" is enabled before enable Delay
Note
:
Bound, because Enable Delay Bound must be work under "Max bridge transit delay bound control
is enabled" situation.
Broadcast Storm Filter Mode: configure broadcast storm control. Enable it and set the upper
。
threshold for individual ports. The threshold is the percentage of the port's total bandwidth used by
broadcast traffic. When broadcast traffic for a port rises above the threshold you set, broadcast
storm control becomes active. The valid threshold values are 5%, 10%, 15%, 20%, 25% and off.
Switch basic setting interface
Apply
button to complete the configuration.