Preparations For Jacking; Jack Location/Spare Tire Stowage - Jeep Compass 2022 Owner's Manual

Hide thumbs Also See for Compass 2022:
Table of Contents

Advertisement

248
IN CASE OF EMERGENCY
P
F
J
REPARATIONS
OR
ACKING
1. Park the vehicle on a firm level surface as far
from the edge of the roadway as possible.
Avoid icy or slippery areas.
WARNING!
Do not attempt to change a tire on the side of
the vehicle close to moving traffic. Pull far
enough off the road to avoid being hit when
operating the jack or changing the wheel.
2. Turn on the Hazard Warning Flashers.
3. Apply the parking brake.
4. Place the ignition in the OFF position.
5. Block both the front and rear of the wheel
diagonally opposite the jacking position. For
example, if the driver's front wheel is being
changed, block the passenger's rear wheel.
Wheel Blocked
NOTE:
Passengers should not remain in the vehicle when
the vehicle is being lifted or raised.
J
L
/S
T
ACK
OCATION
PARE
IRE
If equipped, the jack and tools are located in the
rear storage compartment, below the spare tire.
NOTE:
Items may vary depending on the trim level.
Jack And Tools Location
1 — Jack
2 — Alignment Pin
3 — Emergency Funnel
4 — Wheel Bolt Wrench
5 — Screwdriver
S
TOWAGE

Advertisement

Table of Contents
loading

Table of Contents