Function Operation - Kia Cerato 2021 Manual

Driving your vehicle

Function operation

Function warning and control
Vehicle detection
OBD051385L
To warn the driver a vehicle is
detected, the warning light on the
side view mirror (outside mirror)
will illuminate.
The function will operate when
your vehicle speed is above 20
km/h (12 mph) and the speed of
the vehicle in the blind spot area is
above 10 km/h (7 mph).
Collision warning
Collision warning will operate
when the turn signal is turned on
in the direction of the detected
vehicle.
If Warning only is selected from
the settings menu, the collision
warning will operate when your
vehicle approaches the lane the
blind spot vehicle is detected.
6 110
Blind-Spot Collision-Avoidance Assist (BCA)
To warn the driver of a collision,
the warning light on the side view
mirror (outside mirror) will blink.
When the turn signal is turned off
or you move away from the lane,
the collision warning will be
cancelled and the function will
return to vehicle detection state.
WARNING
The detecting range of the rear
corner radar is determined by a
standard road width, therefore,
on a narrow road, the function
may detect other vehicles in the
second lane from your vehicle and
warn you.
In contrast, on a wide road, the
function may not be able to
detect a vehicle driving in the next
lane and may not warn you.
When the hazard warning light is
on, the collision warning by the
turn signal will not operate.
NOTICE
If the driver's seat is on the left side,
the collision warning may occur
when you turn left. Maintain a
proper distance with the vehicles in
the left lane. If the driver's seat is on
the right side, the collision warning
may occur when you turn right.
Maintain a proper distance with the
vehicles in the right lane.