Maintenance
Vehicle condition
Without driver
[mm (in)]
With driver
[mm (in)]
Head lamp low beam (LHD)
1. Turn the low beam on without driver aboard.
2. The cut-off line should be projected in the cut-off line shown in the pic -
ture.
3. When aiming the low beam, vertical aiming should be adjusted after
adjusting the horizontal aiming.
4. If head lamp levelling device is equipped, adjust the head lamp levelling
device switch with 0 positions.
A : Vehicle axis
B : Vertical line of the left head lamp bulb centre
C : Vertical line of the right head lamp bulb centre
D : Horizontal line of head lamp bulb centre
E : Ground
F : Cut-Off line
8
112
Ground Height
H3
323 (12.7)
313 (12.3)
Based on 10m screen
W1
OYB070176L
Front Fog lamp
Distance between
1206 (47.5)
1206 (47.5)
Light bulbs
lamps
W3