High Mounted Stop Lamp (Bulb Type) Bulb Replacement; High Mounted Stop Lamp Bulb Replacement - Kia Cerato 2021 Manual

Maintenance
High mounted stop lamp (bulb
type) bulb replacement
OBD071204
1. Open the trunk/tailgate lid.
2. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
3. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
4. Insert a new bulb by inserting it
into the socket and rotating it
until it locks into place.
5. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assem -
bly.Push the socket into the
assembly and turn the socket
clockwise.
High mounted stop lamp bulb
replacement
4 door
OBD071054
5 door
OBD071132
If the high mounted stop lamp (1)
does not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an
authorised Kia dealer/service part -
ner.
Light bulbs
8
8 105