Securing A Child Restraint System With A Lap/Shoulder Belt - Kia Cerato 2021 Manual

Safety features of your vehicle
WARNING
Take the following precautions
when installing the top-tether:
Read and follow all installation
instructions provided with your
Child Restraint System.
NEVER attach more than one
Child Restraint System to a single
ISOFIX top-tether anchorage. This
could cause the anchorage or
attachment to come loose or
break.
Do not attach the top-tether to
anything other than the correct
top-tether anchorage. It may not
work properly if attached to
something else.
Child Restraint System anchor -
ages are designed to withstand
only those loads imposed by cor -
rectly fitted Child Restraint Sys -
tem.
Under no circumstances are they
to be used for adult seat belts or
harnesses or for attaching other
items or equipment to the vehicle.
WARNING
Australian design rule
Child restraint anchorages are
designed to withstand only those
loads imposed by correctly fitted
child restraints. Under no circum -
stances are they to be used for
adult seat belts, harnesses, or for
3 42
Child restraint system (CRS)
attaching other items or equipment
to the vehicle.
Securing a Child Restraint System
with a lap/shoulder belt
When not using the ISOFIX system,
all Child Restraint Systems must be
secured to a rear seat with the lap
part of a lap/shoulder belt.
Installing a Child Restraint System
with a lap/shoulder belt
E2MS103005
To install a Child Restraint System
on the rear seats, do the following:
1. Place the Child Restraint System
on a rear seat and route the lap/
shoulder belt around or through
the Child Restraint System, fol -
lowing the Child Restraint Sys -
tem manufacturer s instructions.
Make sure the seat belt webbing
is not twisted.
2. Fasten the lap/shoulder belt latch
into the buckle. Listen for the dis -
tinct click sound. Position the