Headlight Levelling Device - Kia Cerato 2021 Manual

Features of your vehicle
WARNING
The function may not work
around 15 seconds after starting
the vehicle or the initialization or
rebooting of the front view cam -
era.
Do not attempt to disassemble
the front view camera without
the assistance of an authorised
Kia dealer/service partner techni -
cian.
If the front view camera is
removed for any reason, the
function may need to be re-cali -
brated. We recommend that the
function be inspected by an
authorised Kia dealer/service
partner.
If the windscreen of your vehicle
is replaced, most likely the front
view camera will need to be re-
calibrated. If this occurs, have
your vehicle inspected and have
the function re-calibrated by an
authorised Kia dealer/service
partner.
Be careful that water doesn't get
into related parts of High Beam
Assist and do not remove or dam -
age related parts the function.
Do not place objects on the crash
pad that reflect light such as mir -
rors, white paper, etc. The func -
tion may malfunction if sunlight is
reflected.
At times, High Beam Assist may
not work properly. The function is
for your convenience only. It is the
responsibility of the driver for
safe driving practices and always
check the road conditions for your
safety.
When the function does not oper -
ate normally, change the lamp
position manually between the
high beam and low beam.

Headlight levelling device

OBD041400R
To adjust the headlight beam level
according to the number of the pas -
sengers and loading weight in the
luggage area, turn the beam
levelling switch.
The higher the number of the
switch position, the lower the head -
light beam level. Always keep the
headlight beam at the proper
levelling position, or headlights may
dazzle other road users.
Lighting
4
4 133