Function Operating - Kia Cerato 2021 Manual

Driving your vehicle
Warning volume
OBD041619R
With the ignition switch or ENGINE
START/STOP button in the ON posi -
tion, select 'Driver assistance →
Warning volume' from the 'Setup →
Vehicle (LCD Display) or Settings →
Vehicle (Infotainment System
screen)' menu to change the Warn -
ing Volume to 'High', 'Medium' or
Low for Smart CruiseControl.How -
ever, even if Off is selected, the
Warning volume of Smart Cruise
Control will not turn off but the vol -
ume will sound as Low .
If you change the Warning volume,
the Warning volume of other Driver
Assistance functions may change.
NOTICE
If the engine is restarted, Warning
volume will maintain the last set -
ting.
Smart Cruise Control (SCC)

Function operating

Operating conditions
Smart Cruise Control will operate
when the following conditions are
satisfied.
Basic function
The gear is in D (Drive)
The driver s door is closed
EPB (Electronic Parking Brake) is
not applied
Your vehicle speed is within the
operating speed range
10~180 km/h (5~110 mph): when
there is no vehicle in front
0~180 km/h (0~110 mph): when
there is a vehicle in front
ESC (Electronic Stability Control),
TCS (Traction Control System) or
ABS is on
ESC (Electronic Stability Control),
TCS (Traction Control System) or
ABS is not controlling the vehicle
Engine rpm is not in the red zone
Forward Collision-Avoidance
Assist brake control is not operat -
ing
NOTICE
At a stop, if there is vehicle in front
of your vehicle, the function will
turn on when the brake pedal is
depressed.
6
6 137