Kia Cerato 2021 Manual page 269

Features of your vehicle
Front seat
OBD041023R
Rear seat
OBD041024L
With the ignition switch or ENGINE
START/STOP button in the ON posi -
tion:
Push either of the buttons to
warm the driver's seat or the
front passenger's seat.
During mild weather or under condi -
tions where the operation of the
seat warmer is not needed, keep
the levers/switch in the "OFF" posi -
tion.
Temperature control (Manual)
Each time you press the button,
the temperature setting of the
seat will change as follows:
- Front seat
- Rear seat
The seat warmer defaults to the
OFF position whenever the igni -
tion switch or ENGINE START/
STOP button is turned on.
Temperature control (Automatic)
The seat warmer starts to auto -
matically control the seat tempera -
ture in order to prevent low-
temperature burns after being
manually turned ON.
You may manually press the button
to increase the seat temperature.
However, it soon returns to the
automatic mode again.
When pressing the button for
more than 1.5 seconds with the
seat warmer operating, the seat
warmer will turn OFF.
Interior features
4
4 173