Kia Cerato 2021 Manual page 89

Safety features of your vehicle
WARNING
Do not hit or allow any objects to
impact the locations where air
bag or sensors are installed.
This may cause unexpected air
bag deployment, which could
result in serious personal injury or
death.
If the installation location or angle
of the sensors is altered in any
way, the air bags may deploy
when they should not or they
may not deploy when they
should, causing severe injury or
death.
Therefore, do not try to perform
maintenance on or around the air
bag sensors. Have the system
serviced by a professional work -
shop.
Kia recommends to visit an
authorised Kia dealer/service
partner.
Problems may arise if the sensor
installation angles are changed
due to the deformation of the
front bumper, body or front door
and C pillars where side collision
sensors are installed. In this case,
have the system serviced by a
professional workshop.
Kia recommends to visit an
authorised Kia dealer/service
partner.
Your vehicle has been designed to
absorb impact and deploy the air
bag(s) in certain collisions. Install -
Air bag - supplemental restraint system
ing bumper guards or replacing a
bumper with non-genuine parts
may adversely affect your vehi -
cles collision and air bag deploy -
ment performance.
WARNING
If equipped with rollover sensor
If your vehicle is equipped with
side and curtain air bag, set the
ignition switch or the ENGINE
START/STOP button is in the OFF
or ACC position when the vehicle
is being towed.
The side and curtain air bag may
deploy when the ignition switch or
the ENGINE START/STOP button
is ON, and the rollover sensor
detects the situation as a rollover.
Air bag inflation conditions
Front air bags
OBD031040R
Front air bags are designed to
inflate in a frontal collision depend -
3
3 67